Cateye CC-TR200DW (V2c) Manual Page 16
- Page / 21
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ENG-31ENG-30
ENG
M2/- M1/+
M2/- M1/+
3. Pressing the MENU button returns to the menu top screen
(ODO InPUT screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
Setting the auto-mode
Switch on/off of the auto-mode (page 16).
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the AUTO MODE screen using the M1/+ and M2/-
buttons, and confirm with the SSE button.
Menu top:
MENU
Changing the menu:
M1/+
M2/-
Confirm:
SSE
2. Select On or OFF using the M1/+ and M2/- buttons.
On ↔ OFF:
M1/+
M2/-
3. Pressing the MENU button returns to the menu top screen
(AUTO MODE screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
Setting the countdown distance
Enter the target trip distance for the countdown (page 20).
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the C.D.DST→ screen using the M1/+ and M2/-
buttons, and confirm with the SSE button.
Menu top:
MENU
Changing the menu:
M1/+
M2/-
Confirm:
SSE
(or)
(or)
Current setting
Current setting
(or)
(Back)
(Back)
(Back)
(Back)
Setting the measurement unit
Change the unit (km or mile).
* Stop measurement and perform the resetting operation (page 16) before you change
the unit. Unless you perform the resetting operation, “DATA RESET” appears on
the screen, preventing from changing the unit.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the UnIT screen using the M1/+ and M2/- buttons,
and confirm with the SSE button.
Menu top:
MENU
Changing the menu:
M1/+
M2/-
Confirm:
SSE
2. Select the speed unit using the M1/+ and M2/- buttons.
km ↔ mile:
M1/+
M2/-
3. Pressing the MENU button returns to the menu top screen
(UnIT screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
* After the unit is switched, the total distance measured in the past is automatically
converted to the new unit.
Total distance manual entry
You can enter any value to the total distance.
The total distance in the past can be input after formatting or to a new computer.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the ODO InPUT screen using the M1/+ and M2/-
buttons, and confirm with the SSE button.
Menu top:
MENU
Changing the menu:
M1/+
M2/-
Confirm:
SSE
2. Enter the total distance using the M1/+ and M2/- buttons,
and move digits using the SSE button.
* The total distance shall be entered with a positive value.
Increase/decrease:
M1/+
M2/-
Move digits:
SSE
(or)
(or)
(or)
Current speed unit
Current total value
(Back)
(Back)
(Back)
(or)
Continue
- Introduction 1
- About the manuals 1
- Proper use of the CatEye V2c 2
- Contents 2
- Screen display 3
- 2-2. Mount the magnet 4
- Preparing the computer 5
- 2. Date/Clock setting 6
- 4. Set the sensor ID 7
- 3. Tire circumference input 7
- (off) : Transmission off 8
- Upper and middle display data 9
- Backlight 9
- Power-saving function 9
- Pace function 10
- Lap function 10
- Lower display data 10
- Target cadence zone 11
- Countdown distance 11
- F-01 F-02 F-03 F-14 12
- Viewing the lap data 13
- Setting the clock/date 14
- Searching the sensor ID 15
- Setting the auto-mode 16
- Setting the measurement unit 16
- Total distance manual entry 16
- Setting sound 17
- Trouble shooting 18
- Use of the target zone 18
- Replacing battery 19
- Standard accessories 20
- Limited warranty 21
- Registration 21
Related products and manuals for Bicycle accessories Cateye CC-TR200DW (V2c)
(2 pages)
(2 pages)
(2 pages)
(15 pages)Grain-systems Unload Augers PNEG-1556 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Ausrüstung Grain-systems Unload Augers PNEG-1556.
Wir stellen 1 PDF-Handbücher Grain-systems Unload Augers PNEG-1556 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comments to this Manuals